Have you been trying to locate details on What Would Cause My Electric Water Heater to Stop Working??
Numerous modern houses utilize an electrical water heater for their heating system, as a result of its benefit and also simplicity of use. However, similar to any other electrical appliances, issues may emerge with its usage, unexpectedly. It can be actually frustrating to get up to a cold shower as opposed to a hot one or having your bath with water that isn't warm enough or perhaps as well warm. Whatever the situation may be, hot water heater problems can be fairly nerve-racking. The good news is, we've made a checklist of feasible solutions to your hot water heater issues. There are a variety of factors that can cause most of these issues, maybe an issue with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you shut off the main power supply for security. Whatever the problem is, getting it taken care of should not present way too much of a problem if you adhere to these steps:
Inspect Your Power Supply:
As basic as this may appear, it is very needed. Without adequate power, your water heater will certainly not function. So the first thing to do when your water unexpectedly retires is to confirm that it isn't a power issue. Examine if the fuse is blown out or the breaker stumbled. If the circuit breaker is the problem, merely turn it on and off once more. Replace any type of busted or worn-out fuse. Evaluate the device with power after these changes to see if it's now functioning.
Examine the Heating Element in the Water Heater:
If it's not a power issue, after that try having a look at your heating element if it is still functioning. Examine each of your heating elements to be sure the problem isn't with any of them. If any of them is defective, replace that component and afterwards inspect whether the warm water is back on.
Inspect Your Thermostat:
If your water heater still isn't working or the water coming out isn't warm sufficient, you might need to check the temperature settings on your upper thermostat. Make sure the breaker is turned off prior to doing anything. Open the access panel and press the red button for temperature reset over the thermostat. This need to aid warm the water. Transform the breaker back on as well as inspect if the issue has been dealt with.
Call A Professional:
If after replacing all faulty components and also resetting your temperature level, the hot water heater still isn't working, you may need to contact a specialist plumber for a specialist point of view. The issue with your heating unit could be that the hot and cold faucets have been changed or it may be undersized for the amount of hot water needed in your home. Whatever the case might be, a specialist plumber would certainly aid fix the issue.
Conclusion
Water heater troubles are not constantly major. Many of them result from small problems like a blown fuse or worn-out burner. Changing the defective components must work. However, if you are still incapable to fix the problem, give a call to your nearest plumber ahead to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I came across that write up on How to Troubleshoot and Repair an Electric Water Heater when doing a search on the internet. For those who appreciated our blog entry if you please remember to pass it around. We truly appreciate reading our article about How to Troubleshoot and Repair an Electric Water Heater.
Course Detail